Pages

Saturday, March 23, 2013

Mike Holmes: What Makes Floors Squeak?

Squeaky floors - they're not just a problem in older homes. With minimum code requirements, it's just a matter of time before floors in newer homes begin to bounce and squeak. The source of squeaks is usually an inferiorly built subfloor. In this article, reposted from the National Post, Mike explains why floors make noise, and how better building can be the solution to the squeak!

THE HOLMES SPOT HAS STARTED ON ONLINE PETITION TO BRING MIKE'S NEWEST SERIES "HOLMES MAKES IT RIGHT" TO THE US. PLEASE TAKE A MOMENT TO CHECK IT OUT AND SIGN THE PETITION. THANKS!


From the National Post:
Mike Holmes: An archeology course in squeaks



Alex Schuldt, The Holmes Group Ensure floor joists and subfloors are properly secured before installing finished flooring, or you’ll likely face ripping up a newly finished floor.

There are some homes that are impossible to sneak in and out of. Not because of the latest in high-tech security or an iron-clad exterior; these homes have squeaky subfloors and noisy stairs loud enough to wake the dead. And it’s a growing nuisance in more and more homes.

Some new-home owners think squeaky floors or stairs are older-home issues. Not the case. In fact, if your home is built to minimum code, it might not squeak yet — but it will, in time. Go and stand in the middle of a room and start jumping — the floors are going to bounce.

It’s classic minimum code. When homes are built to minimum safety requirements — because that’s what minimum code is — that’s all you’re getting. It will be safe but it might not be built to last more than 10 years.

Squeaky floors are usually a subfloor issue. Minimum code says subfloors need to be built using 2x8s, 16 inches on centre, with a minimum of 5/8 inches of OSB (oriented strand board) sheathing on top. Not to mention that most builders use a nail gun to install subfloors. Together, it’s the perfect recipe for squeaky floors.
If you don’t want your floors and stairs to squeak, use plywood — the real kind — for the subfloor. There’s a lot of debate around plywood, OSB and other types of sheathing for subfloors. Are they comparable? Which one is better? Which one is no good? OSB is even called the “modern version” of plywood. Some kinds are more expensive than plywood.

But bottom line: When I pull up flooring and I see something like particleboard, low-grade OSB or aspenite, I’m not happy. Sixty years ago, subfloors weren’t built of plywood, they were built with heavy planks. Plywood might be above code, but if you want to solve squeaky floors for good, it’s just one part of the package.

Second, you want to make sure the subfloor is properly glued and screwed to the floor joists; if it’s not, there will be squeaking and creaking.

When you use a nail gun to attach subfloor sheathing to the floor joists, the nail sometimes misses the joist. If your basement isn’t finished, take a look at the ceiling. You can see how many nails from the floor above missed the joists (a worker would feel the difference when manually nailing them). That means there are fewer nails holding down the subfloor.

When people walk on a floor where the subfloor hasn’t been properly secured the sheathing moves up and down. This motion will eventually cause the nails that did hit the floor joist to pull away. The squeaking will only get worse.

That’s why I always glue and screw my subfloors. The glue secures that connection and the screw locks it in place. Remember, nails can pull up; screws don’t. This gives us stronger floors that will not move or squeak.

Hardwood flooring also might squeak over time — it expands and contracts depending on the humidity in the home. Wood treads and risers in stairs also shrink with age. Hardwood usually shrinks in the winter because home-heating kills most of the moisture in the air. That can cause gaps between the hardwood boards, which can lead to creaking. Plus, as hardwood is nailed to the subfloor, shrinking can pull the nails out, and thus the squeaking begins.

If the problem has to do with the subfloor — either it’s not plywood or not properly secured to the floor joists with glue and screws — the best option is ripping up the finished floor and making the appropriate repairs. That could mean pulling up the subfloor as well and replacing it with better materials, and using better products to secure it. It’s not a quick fix, or the cheapest. But it solves the problem. That’s why a renovation is a great time to get rid of squeaky floors for good.

Another option is blocking, also known as strapping or bridging. It’s a good option if the creaking is caused because the floor joists are too far apart. There are different ways of blocking — it depends on materials and installation. It also depends if there’s wiring or duct runs in the way. The way I like to do it, and the way I tell my guys to do it, whenever possible, is to screw a piece of wood in between and perpendicular to the two joists. Usually we’re dealing with 2×8 floor joists so we do 8-inch blocking. But if the floor joists are 2x10s, we use 10-inch blocking.

Blocking adds rigidity and stiffness between floor joists, so they won’t move or shift. If you have access to the floor from underneath, i.e. from an unfinished basement without any drywall on the ceiling, you can solve the problem upstairs without having to rip up your finished floors. But if the problem is in the subfloor, you’re out of luck. Those floors have to come up or you’ll have to live with the squeaks.

Catch Mike Holmes in his new series, Holmes Makes It Right Tuesdays at 9 p.m. on HGTV. For more information, visit hgtv.ca. For more information on home renovations, visit makeitright.ca.

9 comments:

  1. I live in a rental, and I wondered why all the noise! Since the floors look newer. I will be filing this info away for when we build. Thank you for sharing your expertise.

    Cassie

    ReplyDelete
  2. Great solutions, thanks a minion Mike.

    ReplyDelete
  3. What do you do when your home is only two years old and floors squeak? Also drywall screws are popping out the walls.

    ReplyDelete
  4. My home was but two years ago and my floors squeak upstairs. Also, drywall screws are popping out everywhere. Is this covered by warranty? I can't get in touch with the contractor.

    ReplyDelete
    Replies
    1. as it states in the article, the floor wasn't properly screwed down with glue. if you are not a renter and own the house you most likely have to get your hands dirty and do it yourself or get it done if you want that annoying squeaks to go away. as for the drywall screws, that is quite common. either they were not screwed in all the way in the studs or have completely missed the stud. drill those screws in, if they are free, that means they arent in the stud. take them out find the stud and screw them in about 2mm deeper than the surface of the drywall. then go ahead and fill the 2mm hole with compound--sand and paint. hope this helps. cheers

      Delete
    2. as it states in the article, the floor wasn't properly screwed down with glue. if you are not a renter and own the house you most likely have to get your hands dirty and do it yourself or get it done if you want that annoying squeaks to go away. as for the drywall screws, that is quite common. either they were not screwed in all the way in the studs or have completely missed the stud. drill those screws in, if they are free, that means they arent in the stud. take them out find the stud and screw them in about 2mm deeper than the surface of the drywall. then go ahead and fill the 2mm hole with compound--sand and paint. hope this helps. cheers

      Delete
    3. as it states in the article, the floor wasn't properly screwed down with glue. if you are not a renter and own the house you most likely have to get your hands dirty and do it yourself or get it done if you want that annoying squeaks to go away. as for the drywall screws, that is quite common. either they were not screwed in all the way in the studs or have completely missed the stud. drill those screws in, if they are free, that means they arent in the stud. take them out find the stud and screw them in about 2mm deeper than the surface of the drywall. then go ahead and fill the 2mm hole with compound--sand and paint. hope this helps. cheers

      Delete
  5. There is professional help out there, repairing squeaky floors. What do you think of those options? Any recommendations?

    Thank you.

    ReplyDelete
  6. I own a Condo in a older building in San Diego. The unit above me has the worst squeaky floor boards. It's awful living under neath the noise. I've contacted the HOA and they said it was the home owners responsibility. After almost 3 years of this I'm ready to take legal action. I have a company to spray insulation in my ceiling. A costly and extremely messy job that I in tend to take on but if the floor boards aren't repaired it's not worth my effort. Need advice or estimate ???

    ReplyDelete